bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Trailer Door Latch


  • Locking Door Latch for Concession Trailer Awning Door
  • While we don't have any specific parts for an awning latch that locks, the Redline Full Size Locking Steel Flush Door Latch # L3980 should do a good job for your application. I'm not exactly sure what design you are looking for so if you have a different latch style that you are trying to replace please let me know and I can see if we have something different for your concession trailer awning door.
    view full answer...

  • Plastic Paddle Handle Door Latch for Featherlite Enclosed Trailer
  • We have options like the Global Link door lock, part # 295-000078, and the baggage door slam latch, part # 295-000078, that sound like they could be what you're looking for. If neither of these will work for you send me a picture and some measurements and I'll see if we have something that works for you.
    view full answer...

  • Recommended Cam Action Door Latches for a 2017 Featherlite 8127 Stock Trailer
  • For your 2017 Featherlite 8127 Stock Trailer, you can use the Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailer # 305736. This cam action door latch comes with a 36" x 1" long pipe, a 5-1/8" tall x 2" wide x 1-3/4" thick hasp, and 4-1/2" tall x 4-1/8" wide mounting brackets. If you needed a door latch with a longer pipe then you'd want # 3057-55 which has a 55" long pipe.
    view full answer...

  • Possible Replacement Key And Door Latch Solution For A Pace American Enclosed Trailer
  • I took a look at what locks may have come on your Pace American trailer, and was not able to find anything in regards to that. However, if your trailer does use a Global Link lock, then the replacement key is the Replacement Key for Global Link RV Locks # 295-000028. If not, then your best bet is top replace the entire door latch. It does appear that your trailer uses a standard door latch, so you could use the: -The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option...
    view full answer...

  • Replacement Handle Assembly Latch Kit and Pipe Retainer
  • We do offer replacement pieces for the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door - Stainless Steel item # PLR258-002-SS you purchased. Replacement Hasp for Polar Cam-Action Latch Kit - 2" Wide - Zinc-Plated Steel item # PLR258-101 Replacement Handle Assembly for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # 158-100 Replacement Top Pipe Retainer for Polar Cam-Action Latch Kits - Zinc-Plated Steel item # PLR158-209
    view full answer...

  • T-Style Hook and Keeper Door Holders for Cargo Trailer
  • I have a solution for you but the largest size we have in the style you referenced is a 6" T-Style Hook and Keeper Door Holder item # 37210525. This one is also stainless steel and comes with mounting hardware. For a 10" long door latch we have the T-Style Hook and Keeper Door Holder for Enclosed Trailer item # 37210482. This is a plastic latch with a different ball style attachment. I have linked a review video.
    view full answer...

  • Recommended Replacement Entry Door Latch for a Trailer
  • I think I got the gist of it. It sounds like you're needing something like the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019 which is meant to be used as a replacement for the main door latch on your trailer. This latch measures 3.47" wide, 4.28" tall, and will fit into cutouts that are 2-1/2" wide x 3-1/2" tall or 3" wide x 4" tall. All of these main entry door latches are going to be around the same size so if this is still too big, let me know what...
    view full answer...

  • What Size Pipe is Required for the Universal Cam-Door Lock for Enclosed Trailers # 383200
  • The Redline Universal Cam-Door Lock, # 383200, will work great for your 36 inch wide doors on your trailer. You will want to use a steel pipe with an inner diameter of 3/4 of an inch and an outer diameter no wider than 1-1/8 inches. The pipe will slide over the upper and lower cam lock ends and run through the 4 brackets. We had this lock in stock, so I pulled one from our warehouse and made a short video for you.
    view full answer...

  • Does Etrailer Sell A Double Sided Slam latch
  • The Bauer Products Manger Door Lock # BA95FR cannot be operated from the interior side. I recommend going for the Global Link RV Baggage Door Slam Latch with Keyed Alike Option # 295-000002. This will give you entry to both outside and inside of the trailer. I linked a video below on the Global Link RV Latch # 295-000002
    view full answer...

  • Replacement Door Lock and Latch for 2000 Exxis Horse Trailer
  • You'll want to take note of the size of your latch cutout in order to determine which replacement latch will work best for you. If your cutout is at least 2-1/2" wide x 3-1/2" tall and up to 3" wide x 4" tall, the Global Link RV Entry Door Latch # 295-000019 will work well for you. If you measure the cutout and find that you've got a larger/smaller size, please let me know and I can help you locate the correct parts.
    view full answer...

  • Hardware Needed To Install The Cam-Action Lockable Door Latch w/ 36 Pipe for Enclosed Trailers
  • We typically recommend just reusing the hardware you already have when installing the Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed Trailers # 305736. If this is not possible in your situation then I recommend using 5/16" carriage bolts, lock nuts, and flat washers that are zinc plated. This isn't a size that we carry, but can easily be found at most hardware stores.
    view full answer...

  • Recommended Replacement Cam Action Lockable Door Latch and Door Lock for an Enclosed Trailer
  • For a handle you can use the Cam-Action Lockable Door Latch for Fold Down Trailer Gate or Side Door # PLR3057-SS. You could still also use a prybar on the Blaylock Door Lock for Enclosed Trailers # BLDL-80, but since there is a pin that runs down the lock through the latches they wouldn't be able to pry the lock off. I've attached a video of the lock for you to check out starting at 11 seconds that shows what I'm talking about.
    view full answer...

  • Replacement RV Screen Door Latch Availability
  • If you are looking for a replacement RV screen door latch, we do carry a few different types depending on what type of screen door you have. For instance, if you have a left-hand Lippert model, the part you need is the Lippert RV Entry Screen Door Latch - LH # LC201472. I went ahead and attached a product listing that shows all of our replacement screen door latch models.
    view full answer...

  • Replacement Cabin Door Latch For A 2004 Fleetwood Tioga 29V
  • The closest I was able to find for your 2004 Fleetwood Tioga 29V is the Bauer Products Rotary Latch for Horse and Utility Trailers # BA85FR, which measures 7-3/8" long, 1-7/8" wide, and 7-3/4" tall. This latch is a bit taller than your original latch dimensions, but if you're willing to make some minor alterations you could make it work. This will work great with doors that are 1-1/2" thick, and will fit into cutout openings measuring 6" tall and 4" wide.
    view full answer...

  • Keyed Alike Door Latches That Can Be Used On Left And Right Hand Hinged Doors
  • I took a peek at what we have, and I found the: -Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000002 for polished chrome, or, -Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019 for black. Both these door latches can be installed on left or the right hand hinged doors, and can be keyed alike to match other Global Link RV locks.
    view full answer...

  • Replacement Slam Latch for Lippert Latch on 2016 Starcraft Launch 26BHS
  • Thank you for the photos! To replace your old Lippert (LCI) slam latch you can use the Lippert Standard Baggage Door Latch Kit - Black # LC317649, which is going to be the same size as your old slam latch and will fit perfectly in the existing cutout and 1/2" thick door.
    view full answer...

  • Locking Trailer Door Latch with Inside Release to Fit 3-3/8 inch by 4-5/8 inch Opening
  • The Full Size Locking Steel Flush Door Latch # L3980 fits into a 3-3/8 inch by 4-5/8 inch opening on your trailer, however it isn't stainless steel. It does have a stainless spring and rustproof finish. Use the Inside Knob # 4PLSP to allow you to open the latch from inside your trailer.
    view full answer...

  • Replacement Key Hole Cover For A Thurobuilt Liberty Horse Trailer
  • The Lock Cylinder Protection Cap for Bauer Products # BA99VR will work for you if you have the Bauer Products trailer latches: BP-15RV BP-27-2 BP-27-4 BP-15B-AE The cap will keep dust and mud out of the cylinder on your door latch. It has a rubber construction which is UV resistant. I attached a review video link below.
    view full answer...

  • Replacement Door Latch Options For A Utility Trailer
  • We do have a bunch of different replacement locks for you, however in order to determine which replacement is the correct replacement, I'll need to know how thick your door is, and the dimensions of your existing lock. For example, the Bauer Products Rotary Latch for Horse and Utility Trailers # BA85FR fits doors that are 1-1/2" thick, and measures 7-3/8" long, 1-7/8" wide, and 7-3/4" tall, and requires a cutout of 6" tall and 4" wide. If you let me know what you need specifically, I'd...
    view full answer...

  • Is There a Trailer Entry Door Lock in White
  • We do have one entry door lock in white, from Global Link: - Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - White # 295-000021 The Global Link # 295-000021 will fit doors that are 1-1/4" to 1-1/2" thick and latch cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. There are no locks specifically for a Joey Nomad RV, so you'll need to make sure your entry door meets these measurements.
    view full answer...